Delivered Loads Continue To Appear
If delivered loads keep showing up in the Select Loads screen when you Refresh, a past load may not recorded as fully delivered in the system.
Delivered Loads Continue To Appear Read More »
If delivered loads keep showing up in the Select Loads screen when you Refresh, a past load may not recorded as fully delivered in the system.
Delivered Loads Continue To Appear Read More »
Use the new Vehicle Tracker tool before contacting support. It is located on a new tab of the Vehicle Details window. Now whenever you look up a vehicle, you can see where it is in the delivery process using the Vehicle Tracker. Before contacting tech support about a vehicle problem, please check the Vehicle Tracker display first to see if you can figure out where it is.
Vehicles Are Not Being Processed Correctly Read More »
These are the steps to take:
Remove Spot Buy Loads From Work In Process Read More »
It can be done any time after we have received the ASN record. It can be done either from the Vehicle Locator using the Set Priority Level option or it can be done from the Vehicle Details window using the Priority Item (No/Yes/Hot) radio buttons.
Mark A Vehicle As Hot Before It’s On The Ground Read More »
How to identify the error Loads that have already been delivered keep showing up in the Select Loads screen of the mobile app when you Refresh from Dispatch. What it means One of the loads that you delivered in the past is not recorded as fully delivered in the system. It may be that an exception came in and was not dealt with, so that even though the driver delivered the load one of the vehicles is still not delivered. When this happens, new loads that the driver picks up are added to the last run, and the vehicles from the last run(s) will continue to show up in the phone. What to do about it Get one or more of the load numbers that keep showing up in the driver’s phone. In the desktop app, go to Payroll/Run Details, do a Find on that Load number. Open the Run, if this is the correct problem then you will see vehicles from several loads in the “Vehicles Delivered” list. Now you have to examine the loads to see which one (or more than one) is still in the EnRoute state. Click “Modify” on the Run window, click on a line for a vehicle from one of the loads and click the “View Load” button. In the Load Details window, check the load status in the upper-right corner. If it’s EnRoute, this load must be Delivered before the Run can be Closed. Deliver the vehicles in the load that are not yet delivered (or if it’s actually enroute, wait for the driver to deliver it). This should automatically close the Run, but if it does not then click Modify on the Run Detail window again and change the Run Status to Closed. Now the driver can go into their phone, do Refresh from Dispatch, and see no vehicles assigned to them.
Old Loads Are Showing Up In The Mobile App Read More »
From the Vehicle Locator window, there is a button labeled “Add Vehicle Hold”. When vehicles are located and displayed in the “Search Results” list, selecting one or more of the vehicles in the list and selecting the “Add Vehicle Hold” button will begin the process of setting the selected vehicles on-hold. For each group, a dialog will appear to enter the details for that groups hold. For example, if there are Ford, GM, Chrysler and Honda vehicles selected, a dialog will appear for the Chrysler vehicles. The details entered will be just for the selected Chrysler vehicles. Then the user will be prompted if they want to report the Ford holds or not, and then they will get the Ford hold dialog to enter the hold properties for the selected Ford vehicles. Then the GM, and then a dialog will appear for any other vehicles not in the previous groups. The vehicles will be processed in the following order: Chrysler: Window used: wdAddVISTADelayTransaction Ford Window used: wdAddFordDelayTransaction – if reported Window used: wdAddVehicleHold – not reported Ford vehicle holds have the option of being reported to the customer or not. If any Ford customer vehicles are selected, then the user will be prompted if they are to be reported. If they are, then Ford vehicle holds are created. If not, then “All Others” holds records will be created for the selected Ford customer vehicles. GM: Window used: wdAddGMDelayTransaction All Others: Window used: wdAddVehicleHold Notes on Vehicle Hold There are multiple Hold types in the system: Vehicle Hold Chrysler Hold Ford Hold GM Hold For Chrysler and Ford you have to use the Chrysler or Ford hold type in order to be able to transmit the data back to the manufacturer. After adding or removing a Ford hold you must do the COPAC Delay and V.V. Delay exports in order to transmit the data back to the manufacturer. For Chrysler it is the VISTA 550 export that needs to be done. The GM Hold only applies to direct communication with GM, where the actual contract is with GM. This would not apply to ShipCarsNow. The regular Vehicle Hold is used for all other customers other than Chrysler, Ford and GM. These do not communicate the hold information back to the Customers.
Setting A Vehicle’s On-Hold Status Read More »
Units are needing location, but the Order has location name already on it? User has to update the dealer information in the order and in the customer file.
Units Are Showing Need Location, But The Order It Has The Location Name On It Read More »
7P errors are due to someone not using the common location for the PASHA destination. If they do not use the common location and put the 7P in the Customer Location Code field of another record, it will report as a final delivery (F) and not as a Transfer (T).
Yes, any location can be used as either a pickup or drop-off location. The classification of Pickup Location or Dropoff Location only really indicates what it is most frequently used as to shorten the result lists when using the Location Locator when building orders. Q: How would one tell if these are set up correctly? A: Common Locations for OEMs usually use code table entries to specify their location identifiers (Port/Railhead Code, SPLC Code, etc).
Can A Common Pickup Location Also Be A Common Delivery Location? Read More »
There is no easy mechanism for putting a multiple leg move on hold. The easiest way to do this is to merge the Legs back together (can be done from the Legs tab of the Vehicle Details window) and then apply the hold.
Vehicle Was Split And Now We Need To Put It On HOLD Read More »